The heavy vehicle industry often has the challenge of moving their products efficiently through the factory. For this purpose, an industrial turntable can be used. This is a system that uses air casters or water casters to rotate heavy objects. The turntable can be built to the client’s specifications. The application possibilities are enormously wide ranging. Just think of rotating and turning trucks, trains and cars inside the plant. Industrial turntables using air/water casters offer an excellent solution for the storage of heavy marine cables after production.

      Turntables are manufactured with an aluminium, steel or wooden top plate placed onto a steel sub-frame. In this frame the air or water casters are mounted upside down so that they raise this top plate and create a film of air prior to rotating. A power drive motor rotates the table. Because the air/water casters ‘float’ the load there is little force needed to move the turntable. Due to the low building height, these turntables can be installed easily with little modification to your current infrastructure. The turntable can be built both into or onto the floor. Very little maintenance is needed because of the simple construction and low number of parts.

      Specific Properties:

      BUILD HEIGHT   min : 70 mm / max. unlimited

      DIAMETER      min : 600 mm / max. unlimited

      CAPACITY       min : 50 kg / max. unlimited

      AIR PRESSURE   min : 1 bar / max. 4 bar

      - NO FLOOR REQUIREMENTS -

      ● Can be fully integrated into your current automation systems (PLC, DCS)

      Typical Applications: